top of page


by Source-Ray, Inc.

The SR-I30 provides higher power, combined with state of the art technology, system reliability and low maintenance, all in a small footprint, lightweight package. The SR-130 provides hospital quality imaging performed anywhere, anytime a portable X-Ray System is transported to a patient. The SR-130 is designed with an intuitive user interface, for care free technique setting and status indication. The SR-130 is the number one power to weight ratio portable X-Ray system on the market today. The SR-130’S is a 100kV/30mA, 3kW system that can reduce exposure times on difficult radiographic anatomical views, thereby minimizing patient motion problems and enhancing image quality. It is offered with our optional Digital upgrade package, or in a film based version. On the film based verso in, the built in Cassette storage area can accommodate up to seven standard 14"x 17" radiographic film cassettes.



Power: 3kW Input Voltage: 115 / 230VAC 50/60Hz kVp Range: 40 - 100 kVp adjustable in 1kV increments - Closed loop regulation mA Range: Adjustable 15 & 30 mA, closed loop regulation mAs Range: 0.15 - 120 Exposure Time: 0.01 – 4.00 seconds Indicators: Digital display of kVp, mAs and Exposure Time, X-Ray, Ready, mA Station and Fault indication. Filtration: 3.6 mm al minimum @ 100kVp Exposure Switch: Detachable two-position


X-Ray Tube

Type: Stationary Anode 100 kVp Target Material: Tungsten Anode Capacity: 30,000 HU Storage Focal Spot: 1.0mm Target Angle: 15°



Type: Collimare CP-1 00-241-C Laser Crosshairs: Center Locator Tape Measure: SID Indicator Inclinometer: Angle Indicator


Travel Stand

Min. F/S to Floor: 13"/33 cm Max. F/S to Floor: 78" /198 cm Hor. Ext. of F/S: 21"/53 cm Hor. Rotation: 200° Tube Rotation: 270° System Weight: 100 lbs. / 45 kG

bottom of page